American Highway’s specialty chemicals are engineered for concrete highway construction and maintenance, ensuring durability in high-traffic environments. Curing compounds form a protective membrane over fresh concrete to retain moisture, reducing shrinkage cracks and enhancing strength, as noted in industry sources like the American Concrete Institute. Admixtures improve workability and set time, optimizing pavement performance under heavy vehicle loads. These chemicals minimize maintenance needs by preventing cracking and surface deterioration, delivering cost-effective, long-lasting highway solutions compliant with industry standards.
Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete.
Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete.
Epoxy adhesive is a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 °F to 110 °F.
Concrete curing compound is a compound which helps to prevent the loss of moisture content from the concrete. So, concrete is properly cured which results the full development of strength of concrete.
Epoxy adhesive is a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 °F to 110 °F.
For use in new construction, repair or remedial applications. DOWSILTM 888 SiliconeJoint Sealant may be used to seal joints that are not uniform in width provided the movement capability of the sealant is not exceeded. May also be used in joints with minor spalling.
Custom order:
-4.5 gal pail
DOWSIL 890-SL Silicone Joint Sealant can be used for concrete-to-concrete and concrete-to-asphalt pavement joints. Self-leveling silicone sealant for concrete and concrete to asphalt pavement joints. For use in new construction, repair or remedial applications. DOWSIL 890-SL Silicone Joint Sealant can be used to seal irregularly shaped and spalled joints.
Custom order:
-4.5 gal pail
-20 oz sausages (16 ea/ctn)
Rapid-cure, self-leveling, two-part silicone rubber sealant designed to seal expansion joint DOWSIL 902 RCS Joint Sealant is primarily intended for use in expansion joints found on bridges or express highways that vary in width from 1 to 3 inches (25 to 76 mm) at the time of sealing. Wider joints can be sealed; contact your representative for recommendations. The substrate may be concrete/concrete, concrete/steel or steel/steel.
• DOWSILTM 902 RCS Joint Sealant can be used as the original sealant in new construction or as a remedial repair sealant in existing construction. In new construction, it provides a long-lasting seal that will prolong the life of the structure.
• For use in repair or remedial applications where other joint sealing materials have failed, it can be used to seal irregularly shaped or minor spalled joints.
Custom order:
-2 ea-20 oz sausages (16 ea/ctn) (40 oz. kit, mix 1 :1)
-2 ea-4.5 gal pail (9 gal kit, mix 1 :1)
High Performance
Armour Coat™ high-performance dowel bar is a solid carbon steel round bar that utilizes a multi-layered fusion-bonded totally encapsulated epoxy powder system. Armour Coat dowels are typically specified in pavements that are classified as “long life” pavements that are designed to last from 50 to 100 years.
Available Downloads
The ability for an epoxy coated dowel bar is dependent on the type of epoxy coating, the thickness of the epoxy, and the application process of the epoxy coating application. This report evaluates the corrosion process of a number of different laboratory specimens including a new generation of epoxy-coated dowel bars.
